IN-LITE ACCESSORIES | Additions making a difference

When planning or installing a 12v lighting system, it's usually the fittings themselves that steal the spotlight (pun intended). But behind every smooth installation is a collection of clever accessories designed to make your in-lite system easier to install. 

If you're already familiar with the in-lite low-voltage lighting system, that's great, but have you explored the range of accessories designed to make installation faster, neater and more flexible for both installers and homeowners?

Here at Landscapeplus, we have a handful of go-to lighting accessories that we recommend as part of every lighting system because they genuinely help simplify the process and improve final results. 

LEVEL for perfectly straight fittings

We've all seen it, a spike-mounted fitting that's every so slightly off-kilter. Once you notice it, you can't unsee it. 

The in-lite LEVEL takes the guesswork out of installing spike-mounted fittings, helping you achieve a perfectly straight result every time. Working much like a traditional spirit level, the built-in air bubble allows you to align the spike before securing it into the ground, plus, its design also makes it easier to drive the spike into harder ground. 

How to use the in-lite LEVEL: simply place the LEVEL on top of the spike, and tap it into position. We'd recommend using a rubber mallet with a larger head to help protect both the accessory and the spike during installation.

A simple tool, but one that can make a real difference to the finished look of your project. 

 You can see the LEVEL in action here>>

ANCHOR for decking, paving and hard landscaping

Not every garden is suitable for spike-mounted fittings, especially if you have decking, paving or concrete areas. That's where the ANCHOR comes in. It provides a simple and secure fixing point wherever a ground spike can't be used. Whether you're installing into timber decking or fixing directly into paving or concrete, the ANCHOR can be fitted quickly and easily using the supplied plug. 

It's particularly useful around seating areas or terraces where you may want decorative lighting without compromising the design of the space. Pairing an ANCHOR with one of the in-lite VOQUE fittings, for example, can create a clean and professional finish without the need for the TRIPOD or SPIKE mounting options. 

WATERLOCK for essential cable waterproofing

Lighting around ponds and water features can completely transform a garden after dark, but naturally, water and electrical connections need careful consideration. 

The in-lite WATERLOCK is one of those small lighting accessories that can save a lot of potential headaches later on. Designed to create a fully waterproof cable connection, it acts as extra protection against moisture and water ingress within your lighting system. 

The WATERLOCK simply clips around the push-fit connector, making it incredibly easy to install. Inside, a protective gel forms a watertight seal around the connection - and with an IP68 rating, you can trust it to stand up to even the most demanding of outdoor conditions. 

It's a small addition to a system, but one that provides extra piece of mind, especially in areas exposed to constant moisture. 

Learn more about the WATERLOCK here>>

RISER to adapt lighting as planting matures

Gardens evolve over time, and it's not uncommon for fittings to become lost within planting as it grows and matures. A spotlight that worked perfectly when first installed can quickly lose its impact and effect.

The in-lite RISER offers a simple solution by allowing you to raise the height of compatible fittings as planting grow. Rather than repositioning the entire fitting, you can adapt the height while maintaining the desired lighting effect and keep your key features illuminated. 

It's a particularly useful option for long-term planting schemes where flexibility is important. We recently used a RISER 2 on an RHS Chelsea trade stand to help adjust lighting levels within the display, a great example of how useful they can be in practice.

Explore the RISER here >>

CABLE ACCESSORIES for flexible installation

While the fittings themselves often get the attention, it's the cable accessories working behind the scenes that allow an in-lite system to truly perform at its best. Accessories such as EXT cables, CC-2 connectors and SPLITTERS give installers the flexibility to plan smarter cable routes and position fittings exactly where they'll have the biggest impact. EXT cables are especially useful when installing fittings on walls or structures, allowing the EASY-LOCK connectors to remain hidden neatly out of sight. 

Take a further look at in-lite cable accessories here>>

For designers and contractors looking to create professional, adaptable systems, these lighting accessories can make a real difference, not just during installation, but to the overall finish of the system too. 

It's often the smaller details that make an installation feel effortless, and these lighting accessories from in-lite are designed with exactly that in mind. From achieving cleaner installations and safer connections, to giving greater flexibility as gardens mature, these accessories help outdoor lighting systems work more effectively for years to come. 

In-lite also offer a whole host of other lighting accessories to help elevate your system, you can check out the complete range here>>